- Authorized Curtis Dealer
- NSF & UL Listed
- Central Indiana Installation & Service
- Up to 21 Gal/Hr
The Curtis G4TP2T10A3100 is a twin 1.5 gallon ThermoPro batch brewer with Curtis’s G4 touchscreen controls. Two brew stations fill two vacuum-insulated ThermoPro servers at once, such as regular and decaf, and a centrally located hot water spout handles tea and other hot drinks. It brews up to 21 gallons per hour and is built for busy restaurants, hotels, conference centers, and catering.
Key Features
Twin Brew Stations
Brew two 1.5 gallon servers at the same time, so two blends or regular and decaf are ready together.
Up to 21 Gal/Hr
High-volume output with a 6.9 gallon tank and enhanced recovery circuitry.
4.3″ Touchscreen
Icon-driven G4 controls with on-screen instructions make training and daily use simple.
One-Touch Recipes
Preset global recipes based on coffee type, grind, and weight, plus 1, 2, or 3 batch brewing.
Gold Cup Controls
Adjust time, temperature, volume, pre-infusion, pulse brewing, and water bypass.
Hot Water Spout
A centrally located spout for tea, cocoa, and other hot drinks.
Self-Diagnostics
Real-time feedback flags preventive maintenance and lime buildup in the tank, with an energy-saving mode.
Encapsulated Control Board
Sealed against steam, water, and impact for long, reliable service.
Specifications
| Manufacturer | Wilbur Curtis |
|---|---|
| Model | G4 ThermoPro Twin 1.5 Gallon Brewer (G4TP2T10A3100) |
| Brewer Type | Automatic twin batch brewer for 1.5 gallon thermal servers |
| Batch Brewing | Field-selectable 1, 2, or 3 batch |
| Output | 15 gal/hr (23-amp setup) or 21 gal/hr (34.5-amp setup) |
| Tank Volume | 6.9 gallons |
| Electrical | 220V, single phase, 3-wire plus ground; 23 amps / 5,100W or 34.5 amps / 7,600W |
| Power Connection | No cord or plug. Must be installed by a qualified technician. |
| Water Connection | Plumbed, 3/8″ flare. 20–90 PSI, 2 GPM minimum flow. |
| Dimensions (H x W x D) | 35.13″ x 20.13″ x 20.75″ |
| Shipping Weight | Approx. 75 lb. |
| Construction | Stainless steel |
| Controls | G4 digital control module with 4.3″ touchscreen |
| Filter Size | 12 1/2″ x 4″ paper filters |
| Certifications | NSF, UL, cUL |
| Manufacturer Warranty | 3 years on the control board; 2 years parts and fittings; 1 year labor |
Compatible Servers
The G4TP2T10A3100 brews directly into these Curtis servers:
| Curtis TXSG1501S600 | ThermoPro 1.5 gallon vacuum server with lockable base, sight glass, and drip tray |
|---|---|
| Curtis TFT15G | FreshTrac 1.5 gallon server with timer lid, level gauge, and lockable stand |
| Curtis TXSG0101S600 | ThermoPro 1 gallon vacuum server with lockable base |
Check out each server’s page for full details.
What’s Included
- Curtis G4TP2T10A3100 twin brewer with G4 touchscreen controls
- Built-in hot water spout
Not included: servers, power cord or wiring, paper filters, water filter, and water line fittings.
Recommended Accessories
- Curtis ThermoPro or FreshTrac 1.5 gallon servers (at least two, plus spares)
- Curtis 12 1/2″ x 4″ paper filters
- Water filter system with replacement cartridges. Poor water quality can void the warranty.
Need water filtration? Check out our water treatment systems.
Central Indiana Installation & Service
This brewer needs a 220V electrical connection, a water line, and a water filter to run its best. Unlike online-only sellers, Bravo Equipment Services is a family-owned company serving Central Indiana since 1999. We are an authorized dealer and service provider for Wilbur Curtis, and the same technicians who install your brewer are the ones who will maintain and repair it.
- Installation and water filter setup
- Flat-rate travel fee, so you know the cost before we arrive
- Repairs and parts for Curtis, Bunn, Nuova Simonelli, Schaerer, and Ice-O-Matic equipment
Frequently Asked Questions
Can I plug it into a regular outlet?
No. It runs on 220V, comes without a cord or plug, and must be installed by a qualified technician. A licensed electrician should confirm your electrical service first.
What is the difference between the two power setups?
At 23 amps (5,100W) it brews up to 15 gallons per hour. At 34.5 amps (7,600W) it brews up to 21 gallons per hour. The right setup depends on your electrical service.
Does it need a water line?
Yes. It is a plumbed brewer with a 3/8″ flare connection and needs at least 2 GPM of water flow. We can install it for you.
What servers does it work with?
Curtis 1.5 gallon ThermoPro and FreshTrac servers. Check out our compatible servers.
Is there a single version?
Yes. The G4TP2S63A3100 is the single-station model, and it runs on 120V or 220V. Check out the Curtis G4TP2S63A3100.
Do you offer delivery and local pickup?
Yes! Call or email us for delivery options, local pickup, and installation scheduling.
Questions Before You Buy?
Whether you’ve been in business a long time or are just starting, we’re glad to help.
Reviews
There are no reviews yet.